Home > E series IGBT driver core >

igbt driver, dual IGBT driver, PSHI 0423 Pro, Max. working frequency 100kHz

Product Categories

3-level HV-IGBT Drivers [18]
IGBT driver [29]
3-level IGBT Driver Core [8]
ALCON capacitance [3]
E series IGBT driver core [13]
IGBT driver circuit [1]
High Power IGBT Driver [7]
SVG / SVC [1]
application Wind power generation、Inverter、Converter、Welding machine &cutting、Induction heating、Trac [1]
HV-IGBT drivers [34]
IGBT driver, thyristor , diode [2]
Parallel Resonant Driver [1]
Plug & Play IGBT Driver [5]
Thyristor Driver [2]

BEIJING POWER-SEM ELECTRONIC TECHNIQUE CO. LTD.

Contact Now

igbt driver, dual IGBT driver, PSHI 0423 Pro, Max. working frequency 100kHz

Place of Origin : Beijing, China

Brand Name : power-sem

Model Number : PSHI 0423 Pro

Contact Now

1.feature

● ASIC dual IGBT driver
● Suitable for all IGBTs up to 1200V/1700V
● Half-bridge mode select,also two independent single drives
● Short circuit and over current protection by VCEsat monitoring
● Isolation due to nanometer amorphous transformer
● Supply undervoltage protection (<12.5V)
● Error memory
● Error “soft turn-off”
● Driver interlock top/bottom in half-bridge mode
● Dead time adjustable
● Internal isolated DC/DC power supply
● ±25A peak current output
● IGBT gate drive voltage+15V/-9V
● 650ns signal conversion time
● 110ns error signal feedback time
● 400ns narrow pulse inhibit eliminate radio frequency interference
● Max. working frequency 100kHz
● Error chain function, low level active
● Clearance distance from primary side to secondary side is 42mm

2.parameter

PSHI 0423 Pro

Absolute Maximum Ratings(Ta=25℃)

Symbol	Term	Values	Unit
V_{S MAX.}	Max. supply voltage primary	+16	V
I_{S MAX.}	Max. supply current primary	330	mA
P_DC/DC	Total power of DC/DC isolation power output	4	W
V_in	Max. PWM input level V_inA; V_inB	V_S+0.5	V
V_iH	Max. logic signal input voltage (Mode select;reset signal;external error)	V_S+0.5	V
I_OC	Max. logic signal output currect (Open-collector output current)	10	mA
I_outAV	Output average current per channel	80	mA
I_outPEAK	Output peak current per channel	±25	A
V_CES	IGBT collector-emitter voltage	1700	V
V_{isol IO}	Isolation voltage IN-OUT(10 sec.AC)	5000	V
V_{isol AB}	Isolation voltage OUT A-OUT B(10 sec.AC)	2500	V
R_{Gon/off min}	Minimal R_gon/R_goff	1	Ω
Q_out/pulse	Charge per pulse	±10^①	μC
dv/dt	Rate of rise and fall of voltage	75	kV/μs
f_{SW max}	Max. working frequency	100	kHz
T_op	Operating temperature	-40...+85	℃
T_stg.	Storage temperatature	-45...+85	℃

Electrical Characteristics(Ta=25℃)

Symbol	Term	Parameter				Unit
Symbol	Term	Min.	Typ.	Max.	Rec.	Unit
V_S	Supply voltage primary	14.5	15	15.5	15	V
I_S	No-load currect primary f_SW= 0kHz f_SW=20kHz f_SW=100kHz		- 80 100 130			mA
V_IT+	Input high level: 15V level 5V level	-- 12 3.2				V
V_IT_-	Input low level: 15V level 5V level			-- 4.5 1.9		V
R_in	Input resistance		33			kΩ
V_G(on)	Turn-on gate voltage		+15			V
V_G(off)	Turn-off gate voltage		-9			V
t_d(on)IO	IN-OUT turn-on delay time		650			ns
t_d(off)IO	IN-OUT turn-off delay time		600			ns
t_d(err)	Error signal return delay time V_CEerror happen-error signal output		110			ns
t_md	Narrow pulse restrained		400			ns
V_CEstat	Reference voltage for V_CEmonitoring V_CE=1700V V_CE=1200V	2 - -		6.8 - -	- 6.2 5.3	V
V_Level	Logic level (External error input; reset signal; mode select)		+8		+15	V
t_pReset	V_ininput both Low reset time		10			μs
t_TD	Dead time adjusted from factory (half-bridge interlock mode)	.05^②	5			μs
C_PS	Primary to secondary capacitance		12			pf

① This value can be expanded externally (on adapter board )by pins.

② Attention! Pins X_S.6,7 should not connect to power supply V_Sor GND directly,Min.R_TDis 1kΩ and corresponding t_TDis about 0.05μs.

3.application

Typical Applications
● Single or bridge circuit
● Inverter
● Welding machine
● Induction heating
● Converter
● High power UPS
● High power high frequency SMPS

China igbt driver, dual IGBT driver, PSHI 0423 Pro, Max. working frequency 100kHz wholesale

igbt driver, dual IGBT driver, PSHI 0423 Pro, Max. working frequency 100kHz Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	BEIJING POWER-SEM ELECTRONIC TECHNIQUE CO. LTD.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!